D-Link DWS-1008 Cli Reference Manual page 246

clear dot1x reauth-max
Resets the maximum number of reauthorization attempts to the default setting.
Syntax: clear dot1x reauth-max
Defaults: The default is 2 attempts.
Access: Enabled.
Examples: Type the following command to reset the maximum number of reauthorization
attempts to the default:
DWS-1008# clear dot1x reauth-max
success: change accepted
See Also:
• set dot1x reauth-max
• show dot1x
clear dot1x reauth-period
Resets the time period that must elapse before a reauthentication attempt, to the default time
period.
Syntax: clear dot1x reauth-period
Defaults: The default is 3600 seconds (1hour).
Access: Enabled.
Examples: Type the following command to reset the default reauthentication time period:
DWS-1008# clear dot1x reauth-period
success: change accepted
See Also:
• set dot1x reauth-period
• show dot1x
D-Link DWS-1008 CLI Manual