D-Link DWS-1008 Cli Reference Manual page 268

show sessions network session-id Output
Field
Local Id
Global Id
State
SSID
Port/Radio
MAC address
User Name
IP Address
Vlan Name
Tag
Session Start
Last Auth Time
Last Activity
Session Timeout
Idle Time-To-Live
Login Type
EAP Method
Session statistics
as updated from AP
Unicast packets in
Unicast bytes in
Unicast packets out
D-Link DWS-1008 CLI Manual
Identifier for the session on this particular switch. (This is the session ID you specify when
entering the show sessions network session-id command.)
Unique session identifier within the network.
Status of the session:
• AUTH, ASSOC REQ—Client is being associated by the 802.1X protocol.
• AUTH AND ASSOC—Client is being associated by the 802.1X protocol, and the user
is being authenticated.
• AUTHORIZING—User has been authenticated (for example, by the 802.1X protocol
and an AAA method), and is entering AAA authorization.
• AUTHORIZED—User has been authorized by an AAA method.
• ACTIVE—User's AAA attributes have been applied, and the user is active on the
network.
• DEASSOCIATED—One of the following:
• Wireless client has sent the switch a disassociate message.
• User associated with one of the current switch's access points has appeared at
another switch in the network.
• STATUS UPDATED—switch is receiving a final update from an access point about the
user, who has roamed away.
• WEB_AUTHING—User is being authenticated by WebAAA.
• WIRED AUTH'ING—User is being authenticated by the 802.1X protocol on a wired
authentication port.
• KILLING—User's session is being cleared, because of 802.1X authentication failure,
entry of a clear command, or some other event.
Name of the SSID the user is on.
Number of the port and radio through which the user is accessing this session.
MAC address of the session user.
Name of the authenticated user of this session
IP address of the session user.
Name of the VLAN associated with the session.
System-wide supported VLAN tag type.
Indicates when the session started.
Indicates when the most recent authentication of the session occurred.
Indicates when the last activity (transmission) occurred on the session.
Assigned session timeout in seconds.
Number of seconds the session can remain idle before MSS changes the session state
to Disassociated.
Authentication type used to log onto the network:
• DOT1X
• MAC
• LAST-RESORT
• WEB-PORTA
Extensible Authentication Protocol (EAP) type used to authenticate the session user, and
the IP address of the authentication server.
Time the session statistics were last updated from the access point, in seconds since a
fixed standard date and time.
Total number of unicast packets received from the user by the switch (64-bit counter).
Total number of unicast bytes received from the user by the switch (64-bit counter).
Total number of unicast packets sent by the switch to the user (64-bit counter).
Description