D-Link DWS-1008 Cli Reference Manual page 392

Syntax: set service-profile name user-idle-timeout seconds
name
seconds
Defaults: The default user idle timeout is 180 seconds (3 minutes).
Access: Enabled.
Examples: The following command increases the user idle timeout to 360 seconds (6 minutes):
DWS-1008# set service-profile sp1 user-idle-timeout 360
success: change accepted.
See Also:
• set service-profile idle-client-probing
• set service-profile web-portal-session-timeout
• show service-profile
set service-profile web-portal-acl
Changes the ACL name MSS uses to filter a Web-Portal user's traffic during authentication.
Use this command if you create a custom Web-Portal ACL to allow more than just DHCP traffic
during authentication. For example, if you configure an ACL that allows a Web-Portal user to
access a credit card server, use this command to use the custom ACL for Web-Portal users that
associate with the service profile's SSID.
Syntax: set service-profile name web-portal-acl aclname
Service profile name.
name
aclname Name of the ACL to use for filtering Web-Portal user traffic during
authentication.
Defaults: By default, a service profile's web-portal-acl option is unset. However,when you
change the service profile's auth-fallthru option to web-portal, MSSsets the web-portal-acl
option to portalacl. (MSS automatically creates the portalacl ACL the first time you set any service
profile's auth-fallthru option to web-portal.)
D-Link DWS-1008 CLI Manual
Service profile name.
Number of seconds a client is allowed to remain idle before MSS changes the
session to the Dissociated state. You can specify from 20 to 86400 seconds.
To disable the timer, specify 0.
8