Show Igmp - D-Link DWS-1008 Cli Reference Manual

show igmp

Displays IGMP configuration information and statistics for one VLAN or all VLANs.
Syntax: show igmp [vlan vlan-id]
vlan vlan-id
Defaults: None.
Access: All.
Examples: The following command displays IGMP information for VLAN orange:
DWS-1008# show igmp vlan orange
VLAN: orange
IGMP is enabled
Proxy reporting is on
Mrouter solicitation is on
Querier functionality is off
Configuration values: qi: 125 oqi: 300 qri: 100 lmqi: 10 rvalue: 2
Multicast
router information:
Port Mrouter-IPaddr
-------------------------------------------------------------------------------------------------
5 192.28.7.5
Group
--------------------------------------------------------------------------------------------------
224.0.0.2
237.255.255.255
237.255.255.255
237.255.255.255
237.255.255.255
237.255.255.255
Querier information:
Querier for vlan orange
Port Querier-IP
---------------------------------------------------------------------
1 193.122.135.178
IGMP vlan member ports: 2,4,5,6,7,8
IGMP static ports: none
IGMP statistics for vlan orange:
D-Link DWS-1008 CLI Manual
VLAN name or number. If you do not specify a VLAN, MSS displays IGMP
information for all VLANs.
Mrouter-MAC
00:01:02:03:04:05 dvmrp
Port Receiver-IP
none none
5 10.10.10.11
5 10.10.10.13
5 10.10.10.14
5 10.10.10.12
5 10.10.10.10
Querier-MAC
00:0b:cc:d2:e9:b4 23
Type TTL
17
Receiver-MAC TTL
none undef
00:02:04:06:08:0b 258
00:02:04:06:08:0d 258
00:02:04:06:08:0e 258
00:02:04:06:08:0c 258
00:02:04:06:08:0a 258
TTL
0