D-Link DWS-1008 Cli Reference Manual page 43
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Product manual (502 pages) ,
- User manual (454 pages) ,
- Cli reference manual (406 pages)
Table of Contents
Advertisement
Table: Output for monitor port counters
Statistics Option
Displayed for All
Options
octets
packets
receive-errors
D-Link DWS-1008 CLI Manual
Field
Port
Port the statistics are displayed for.
Status
Port status. The status can be Up or Down.
Total numbewr of octets reveived by the port.
Rx Octets
This number includes octets received in frames that
contained errors.
Total number of octets transmitted.
Tx Octets
This number includes octets transmitted in frames that
contained errors.
Number of unicast packets received.
Rx Unicast
This number does not include packets that contain errors.
Number of broadcast and multicast packets received.
Rx NonUnicast
This number does not include packets that contain errors.
Number of unicast packets transmitted.
Tx Unicast
This number does not include packets that contain errors.
Number of broadcast and multicast packets transmitted.
Tx NonUnicast
This number does not include packets that contain errors.
Number of frames received by the port that had the
correct length but contained an invalid frame check
Rx Crc
sequence (FCS) value. This statistic includes frames with
misalignment errors.
Total number of frames received in which the Physical
Rx Error
layer (PHY) detected an error.
Number of frames received by the port that were fewer than
Rx Short
64 bytes long.
Number of frames received by the port that were valid but
were longer than 1518 bytes.
Rx Overrun
This statistic does not include jumbo packets with valid
CRCs.
Description
0
Advertisement
Table of Contents
