D-Link DWS-1008 Cli Reference Manual page 107

notification-type
• APBootTraps—Generated when an access point boots.
• ApNonOperStatusTraps—Generated to indicate an AP radio is nonoperational.
• ApOperRadioStatusTraps—Generated when the status of an AP radio changes.
• APTimeoutTraps—Generated when an access point fails to respond to the switch.
• AuthenTraps—Generated when the switch's SNMP engine receives a bad community string.
• AutoTuneRadioChannelChangeTraps—Generated when the RF Auto-Tuning feature changes
the channel on a radio.
• AutoTuneRadioPowerChangeTraps—Generated when the RFAuto-Tuning feature changes
the power setting on a radio.
• ClientAssociationFailureTraps—Generated when a client's attempt to associate with a radio
fails.
• ClientAuthorizationSuccessTraps—Generated when a client is successfully authorized.
• ClientAuthenticationFailureTraps—Generated when authentication fails for a client.
• ClientAuthorizationFailureTraps—Generated when authorization fails for a client.
• ClientClearedTraps—Generated when a client's session is cleared.
• ClientDeAssociationTraps—Generated when a client is dissociated from a radio.
• ClientDot1xFailureTraps—Generated when a client experiences an 802.1X failure.
• ClientRoamingTraps—Generated when a client roams.
• CounterMeasureStartTraps—Generated when MSS begins countermeasures against a rogue
access point.
D-Link DWS-1008 CLI Manual
Name of the notification type:
10