D-Link DWS-1008 Cli Reference Manual page 507

8 port 10/100 wireless switch with power over ethernet

Hide thumbs Also See for DWS-1008:

Table of Contents

The table below describes the fields in this display.

D-Link DWS-1008 CLI Manual

Name of the snoop filter.

Distributed AP containing the radio to which the filter is mapped.

Radio to which the filter is mapped.

Number of packets received by the radio that match the filter.

Number of packets sent by the radio that match the filter.

Number of packets that matched the filter but that were not copied to the observer due to

memory or network problems.

Filter state:

• running—enabled

• stopped—disabled

• number-of-packets—If the filter is running and the stop-after option was used to stop the filter,

this field displays the number of packets that still need to match before the filter is stopped.