D-Link DWS-1008 Cli Reference Manual page 479

acl-name
permit
cos cos
deny
protocol
D-Link DWS-1008 CLI Manual
Security ACL name. ACL names must be unique within the switch, must start
with a letter, and are case-insensitive. Specify an ACL name of up to 32 of the
following characters:
• Letters a through z and A through Z
• Numbers 0 through 9
• Hyphen (-), underscore (_), and period (.)
D-Link recommends that you do not use the same name with different
capitalizations for ACLs. For example, do not configure two separate ACLs
with the names acl_123 and ACL_123.
Note: In an ACL name, do not include the term all, default-action, map, help,
or editbuffer.
Allows traffic that matches the conditions in the ACE.
For permitted packets, a class-of-service (CoS) level for packet handling.
Specify a value from 0 through 7:
• 1 or 2—Background. Packets are queued in AP forwarding queue 4.
• 0 or 3—Best effort. Packets are queued in AP forwarding queue 3.
• 4 or 5—Video. Packets are queued in AP forwarding queue 2. Use CoS
level 4 or 5 for voice over IP (VoIP) packets other than SpectraLink
Voice Priority (SVP).
• 6 or 7—Voice. Packets are queued in AP forwarding queue 1. Use 6 or
7 only for VoIP phones that use SVP, not for other types of traffic.
Blocks traffic that matches the conditions in the ACE.
IP protocol by which to filter packets:
• ip
• tcp
• udp
• icmp
• A protocol number between 0 and 255