D-Link DWS-1008 Cli Reference Manual page 449

VLAN based information & statistics
spanning tree type
spanning tree multicast address
bridge priority
bridge MAC address
bridge hello time
bridge forward delay
topology change initiator:
last topology change occured:
topology change
topology change time
topology change detected
topology change count
topology change last recvd. from
Other port specific info
dynamic max age transition
port BPDU ok count
msg age expiry count
link loading
BPDU in processing
num of similar BPDU's to process
received_inferior_bpdu
next state
src MAC count
total src MAC count
curr_src_mac
next_src_mac
The table below describes the fields in this display.
Field
Port
VLAN
Spanning Tree enabled for vlan
port spanning tree
state
port_id
port_number
path cost
D-Link DWS-1008 CLI Manual
ieee
01-00-0c-cc-cc-cd
32768
00-0b-0e-12-34-56
2
15
0
Tue Jul 01 2003 22:33:36.
FALSE
35
FALSE
1
00-0b-0e-02-76-f6
0
21825
0
0
FALSE
0
FALSE
0
21807
21825
00-0b-0e-00-04-30
00-0b-0e-02-76-f6
Port number.
VLAN ID.
State of the STP feature on the VLAN.
State of the STP feature on the port.
STP state of the port:
• Blocking—The port is not forwarding Layer 2 traffic but is listening to and
forwarding STP control traffic.
• Disabled—The port is not forwarding any traffic, including STP control traffic.
The port might be administratively disabled or the link might be disconnected.
• Forwarding—The port is forwarding Layer 2 traffic.
• Learning—The port is learning the locations of other devices in the spanning
tree before changing state to forwarding.
• Listening—The port is comparing its own STP information with information in
STP control packets received by the port to compute the spanning tree and
change state to blocking or forwarding.
STP port ID.
STP port number.
Cost to use this port to reach the root bridge. This is part of the total path cost
(designated cost).
Description