Show Sessions Network - D-Link DWS-1008 Cli Reference Manual

The table below describes the fields of the show sessions admin, show sessions console,
and show sessions telnet displays.
show sessions admin, show sessions console, and show sessions
telnet Output
Field
Tty
Username
Time (s)
Type
show sessions telnet client Output
Field
Session
Server Address
Server Port
Client Port
See Also:
• clear sessions

show sessions network

Displays summary or verbose information about all network sessions, or network sessions for a
specified username or set of usernames, MAC address or set of MAC addresses, VLAN or set
of VLANs, or session ID.
Syntax: Syntax
ssid-name | vlan vlan-glob | session-id session-id | wired] [verbose]
user user-glob
mac-addr
mac-addr-glob
D-Link DWS-1008 CLI Manual
The Telnet terminal number, or console for administrative users connected through the
console port.
Up to 30 characters of the name of an authenticated user.
Number of seconds the session has been active.
Type of administrative session:
• Console
• SSH
• Telnet
Session number assigned by MSS when the client session is established.
IP address of the remote device.
TCP port number of the remote device's TCP server.
TCP port number MSS is using for the client side of the session.
show sessions network [user user-glob | mac-addr mac-addr-glob | ssid
Displays all network sessions for a single user or set of users. Specify
a username, use the double-asterisk wildcard character (**) to specify all
usernames, or use the single-asterisk wildcard character (*) to specify a set
of usernames up to or following the first delimiter character—either an at
sign (@) or a period (.). (For details, see "User Globs" on page 6.)
Displays all network sessions for a MAC address. Specify a MAC address in
hexadecimal numbers separated by colons (:). Or use the wildcard character
(*) to specify a set of MAC addresses. (For details, see "MAC Address Globs"
on page 7.)
Description
Description
0