D-Link DWS-1008 Cli Reference Manual page 421

The following command displays information for all Distributed APs configured on this DWS-1008
that have active connections:
DWS-1008# show dap connection
Total number of entries: 1
DAP Serial Id
7 223344
The following table describes the fields in the display:
Field
DAP
Serial Id
DAP IP Address
DWS-1008 IP Address
show dap global
Displays connection information for Distributed APs configured on an DWS-1008.
Syntax: show dap global [dap-num | serial-id serial-ID]
dap-num
serial-id
Defaults: None.
Access: Enabled.
Usage: Connections are shown only for the Distributed APs that are configured on the
DWS-1008 from which you enter the command.
D-Link DWS-1008 CLI Manual
DAP IP Address DWS-1008 IP Address
10.10.4.88
Connection ID you assigned to the Distributed AP.
If the connection is configured on another DWS-1008, this field contains a
hyphen ( - ).
Serial ID of the Distributed AP.
IP address assigned by DHCP to the Distributed AP.
System IP address of the DWS-1008 on which the AP has an active connection.
This is the switch that the AP used for booting and configuration and is using for
data transfer.
Number of a Distributed AP for which to display configuration settings.
DWL-8220AP access point serial ID.
10.9.9.11
Description
18