D-Link DWS-1008 Cli Reference Manual page 152

weekday
month
hour
min
end
Defaults: If you do not specify a start and end time, the system implements the time change
starting at 2:00 a.m. on the first Sunday in April and ending at 2:00 a.m. on the last Sunday in
October, according to the North American standard.
Access: Enabled.
Usage: You must first set the time zone with the set timezone command for the offset to work
properly without the start and end values. Configure summertime before you set the time and
date. Otherwise, summertime's adjustment of the time will make the time incorrect, if the date is
within the summertime period.
Examples: To enable summertime and set the summertime time zone to PDT (Pacific Daylight
Time), type the following command:
DWS-1008# set summertime PDT
success: change accepted
See Also:
• clear summertime
• clear timezone
• set timedate
• set timezone
• show summertime
• show timedate
• show timezone
D-Link DWS-1008 CLI Manual
Day of the week to start or end the time change. Valid values are sun,
mon, tue, wed, thu, fri, and sat.
Month of the year to start or end the time change. Valid values are jan, feb,
mar, apr, may, jun, jul, aug, sep, oct, nov, and dec.
Hour to start or end the time change—a value between 0 and 23 on the
24-hour clock.
Minute to start or end the time change—a value between 0 and 59.
End of the time change period.
1