D-Link DWS-1008 Cli Reference Manual page 358

Table: Defaults for Radio Profile Parameters (continued)
Parameter
user-idle-timeout
Note: This is the default only if
web-portal-acl the fallthru type on the service
portal. Otherwise, the value is
web-portal-form
web-portal-
session-timeout
wep key-index
web active-
multicast-index
wep active-unicast
-index
wpa-ie
D-Link DWS-1008 CLI Manual
Default Value
180
portalacl
profile has been set to web-
unconfigured.
Not configured
5
No Keys defined
1
1
disable
Radio Behavior When Parameter Set to Default Value
Allows a client to remain idle for 180 seconds (3 minutes) before
MSS changes the client's session to the Disassociated state.
If set to portalacl and the service profile fallthru is set to web-
portal, radios use the portalacl ACL to filter traffic for Web Portal
users during authentication.
If the fallthru type is not web-portal, radios do not use the web-
portal-acl setting.
For WebAAA users, serves the D-Link login page.
Allows a Web Portal WebAAA session to remain in the Deassociated
state 5 seconds before being terminated automatically.
Uses dynamic WEP rather than static WEP.
Note: If you configure a WEP key for static WEP, MSS continues
to also support dynamic WEP.
Uses WEP key 1 for static WEP encryption of multicast traffic if
WEP encryption is enabled and keys are defined.
Uses WEP key 1 for static WEP encryption of unicast traffic if
WEP encryption is enabled and keys are defined.
Does not use the WPA IE in transmitted frames.