D-Link DWS-1008 Cli Reference Manual page 32

show licenses
Displays information about the license key(s) currently installed on an DWS-1008 switch.
Syntax: show licenses
Defaults: None.
Access: All
Examples: To view license keys, type the following command:
DWS-1008# show licenses
Feature
See Also:
• set license
show load
Displays CPU usage on a DWS-1008 switch.
Syntax: show load
Defaults: None.
Access: Enabled.
Examples: To display the CPU load recorded from the time the switch was booted, as well as
from the previous time the show load command was run, type the following command:
DWS-1008# show load
System Load: overall: 2% delta: 5%
The overall field shows the CPU load as a percentage from the time the switch was booted. The
delta field shows CPU load as a percentage from the last time the show load command was
entered.
D-Link DWS-1008 CLI Manual
: 80 additional APs