D-Link DWS-1008 Cli Reference Manual page 170

Examples: In the following example, an administrator establishes a Telnet session with another
switch and enters a command on the remote switch:
DWS-1008# telnet 10.10.10.90
Session 0 pty tty2.d Trying 10.10.10.90...
Connected to 10.10.10.90
Disconnect character is '^t'
Copyright (c) 2002, 2003 D-Link Systems, Inc.
Username:
Password:
DWS-1008-remote> show vlan
VLAN Name
-----------------------------------------------------------------------------------------------------------
1 default
3 red
4 backbone
When the administrator presses Ctrl+t to end the Telnet connection, the management session
returns to the local DWS prompt:
DWS-1008-remote> Session 0 pty tty2.d terminated tt name tty2.d
DWS-1008#
See Also:
• clear sessions
• show sessions
D-Link DWS-1008 CLI Manual
username
password
Admin VLAN
Status State
Up Up
Up Up
Up Up
Tunl Port
Affin Port Tag State
5
1 none Up
5
5
7 none Up
8 none Up
1