D-Link DWS-1008 Cli Reference Manual page 378

8 port 10/100 wireless switch with power over ethernet

Hide thumbs Also See for DWS-1008:

Table of Contents

set service-profile rsn-ie

Enables the Robust Security Network (RSN) Information Element (IE).

The RSN IE advertises the RSN (sometimes called WPA2) authentication methods and cipher

suites supported by radios in the radio profile mapped to the service profile.

Syntax: set service-profile name rsn-ie {enable | disable}

Defaults: The RSN IE is disabled by default.

Access: Enabled.

Usage: When the RSN IE is enabled, the default authentication method is 802.1X. There is no

default cipher suite. You must enable the cipher suites you want the radios to support.

Examples: The following command enables the RSN IE in service profile sprsn:

DWS-1008# set service-profile sprsn rsn-ie enable

success: change accepted.