D-Link DWS-1008 Cli Reference Manual page 427

show service-profile
Displays service profile information.
Syntax show service-profile {name | ?}
name
?
Defaults None.
Access Enabled.
Examples The following command displays information for service profile sp1:
DWS-1008# show service-profile sp1
ssid-name:
Beacon:
DHCP restrict:
Short retry limit:
Auth fallthru:
Enforce SODA checks:
Custom success web-page:
Custom logout web-page:
Static COS:
CAC mode:
User idle timeout:
Keep initial vlan:
Web Portal ACL:
WEP Key 1 value:
WEP Key 3 value:
WEP Unicast Index:
Shared Key Auth:
WPA enabled:
ciphers: cipher-tkip
authentication: 802.1X
TKIP countermeasures time: 60000ms
vlan-name = orange
session-timeout = 300
service-type = 2
11a beacon rate:
11a mandatory rate: 6.0,12.0,24.0
11b beacon rate:
11b mandatory rate: 1.0,2.0
11g beacon rate: 2.0
11g mandatory rate: 1.0,2.0,5.5,11.0 standard rates: 6.0,9.0,12.0,18.0,24.0, 36.0,48.0,54.0
D-Link DWS-1008 CLI Manual
Displays information about the named service profile.
Displays a list of service profiles.
corp2
yes
no
5
none
yes
no
none
180
no
<none>
<none>
1
NO
6.0
2.0
ssid-type:
Proxy ARP:
No broadcast:
Long retry limit:
Sygate On-Demand (SODA):
SODA remediation
Custom failure web-page:
Custom agent-directory:
COS:
CAC sessions:
Idle client probing:
Web Portal Session Timeout:
WEP Key 2 value:
WEP Key 4 value:
WEP Multicast Index:
multicast rate:
standard rates: 9.0,18.0,36.0,48.0,54.0
multicast rate:
standard rates: 5.5,11.0
multicast rate:
crypto
no
no
5
no
ACL:
0
14
yes
5
<none>
<none>
1
AUTO
AUTO
AUTO