D-Link DWS-1008 Cli Reference Manual page 505

show snoop
Displays the AP radio mapping for all snoop filters.
Syntax: show snoop
Defaults: None.
Access: Enabled.
Usage: To display the mappings for a specific AP radio, use the show snoop map command.
Examples: The following command shows the AP radio mappings for all snoop filters configured
on a DWS-1008 switch:
DWS-1008# show snoop
Dap: 3 Radio: 2
snoop1
snoop2
Dap: 2 Radio: 2
snoop2
See Also:
• clear snoop map
• set snoop map
• show snoop map
show snoop info
Shows the configured snoop filters.
Syntax: show snoop filter-name
filter-name Name of the snoop filter.
Defaults: None.
Access: Enabled.
Examples: The following command shows the snoop filters configured in the examples above:
DWS-1008# show snoop info
snoop1:
observer 10.10.30.2 snap-length 100
all packets
snoop2:
observer 10.10.30.3 snap-length 100
frame-type eq data
mac-pair (aa:bb:cc:dd:ee:ff, 11:22:33:44:55:66)
See Also:
• clear snoop
• set snoop
D-Link DWS-1008 CLI Manual 0