Initial Steps . . .
Processing Tab Papers
When using the bypass tray to process tab papers, note the following:
G
Make sure that you have set "Tab Paper" for the "Copy Size" bypass
tray. For more information, see page 4-62.
G
Position the tab papers in the bypass tray so that the tabs are located
in the back right corner.
G
Make sure that the first tab points up. The following tabs must be in the
correct sequence below it.
Examples:
Di5510/Di7210
1, 2, 3
Section 1
Introduction
1, 2, 3, 1, 2, 3, 1, 2, 3
Section 1
Section 1
Introduction
Section 1
Introduction
Introduction
Section 1
Introduction
Section 1
Section 1
Section 1
Introduction
Introduction
Introduction
3
3-47