Konica Minolta Di5510 Advanced Information page 216

4
5
Press the [Start] key on the control panel to start scanning the original.
The data is scanned into memory.
6
Check that enough memory is still
available.
? Is there too little available
memory left?
§ Do not scan any more originals.
7
Repeat steps 4, 5 and 6 to scan
other originals.
? How can I delete the data that
has been scanned into memory?
§ Press the [Stop] key on the control panel. A dialog field is displayed
on the touch screen. Press the [Exit] key to confirm the deletion of
the data.
8
Press the [Store] key to complete the scanning procedure.
9
Press the [Start] key on the control panel to start the copy job.
The copies are output. When the output cycle finishes, the scanned
data in the memory is deleted automatically.
Do you want to cancel the copy cycle?
?
§ Press the [Stop] key on the control panel.
4-68
Basic Functions
Di5510/Di7210