Procedure: Program Job - Konica Minolta Di5510 Advanced Information

5

Procedure: Program Job

1
In the basic options press the [Application] key.
The screen with the
2
Press the [Program Job] key and confirm your selection with [OK].
The basic options are displayed again. The document memory is
enabled automatically.
3
Change any other necessary system settings.
4
Load the originals
H
into the EDH
H
on the original glass.
5
Press the [Start] key on the control panel to start the scanning cycle.
A dialog appears after every scanning cycle.
5-28
Applications is displayed.
Applications
Di5510/Di7210