Troubleshooting; If Your Copy Is Incorrect - Konica Minolta Di5510 Advanced Information

Troubleshooting

8 Troubleshooting
8.1

If Your Copy Is Incorrect

Symptom
The copy is too light.
The copy is too dark.
The copy is blurred.
Di5510/Di7210
Possible Cause
The exposure is set too light.
The exposure was manually set
to too light a value.
The paper is damp.
The toner has run out.
The paper is not loaded
correctly.
The set exposure level is too
dark.
The original glass is dirty.
The original is not flat against the
original glass.
The paper is damp.
Action
Change the basic options for
exposure.
See page 4-52.
Manually brighten or darken the
exposure for the copy. See
page 4-49.
Manually brighten or darken the
exposure for the copy. See
page 4-49.
Replace the paper.
If the message Add toner
appears, add toner. See page 2-
54.
Load the paper correctly. See
page 2-43.
Change the basic options for
exposure.
See page 4-52.
Manually brighten the exposure
of the copy. See page 4-49.
Clean the original glass.
See page 9-2.
Place the original correctly on
the original glass. See page 3-8.
Replace the paper.
8
8-1