Features That Can Only Be Set Up By A Service Technician - Konica Minolta Di5510 Advanced Information

Introduction

Features that can only be Set Up by a Service Technician

The following features can only be set up by a service technician. If you
want to have the following features set up for your use, contact your
technical representative.
Key Operator Password
The service technician can define a 4-digit key operator mode master
code. Access to key operator mode then can only be acquired after
entering the master code.
E.K.C. Master Key Code
The service technician can define an 8-digit E.K.C. master key code.
Access to the settings for the E.K.C. counter then can only be acquired
after entering the master code.
Weekly Timer Master Key Code
The service technician can define a 4-digit weekly timer master code.
Access to the settings for the weekly timer then can only be acquired after
entering the master code.
View the Weekly Timer Times on the Help Screen
The service technician can set up a button on the help screen to call up
the weekly timer times. This button then allows the user to view the weekly
timer times.
Touch Screen Contrast Settings on the Help Screen
The service technician can set up a button on the help screen to adjust the
contrast of the touch screen.
Messages: ADD TONER and PM CALL
The service technician can set up the system to display the following
messages automatically:
When the toner level in the cartridge is very low:
When maintenance is required:
Di5510/Di7210
ADD TONER
PM CALL.
1
1-15