13) Memory Switch Setting; Changing Settings - Konica Minolta Di5510 Advanced Information

7
7.14

(13) Memory Switch Setting

Configure various settings to optimize your system.

Changing Settings

1
Call up key operator mode.
The key operator mode menu is displayed.
2
Press the down arrow key on the lower edge of the touch screen.
The second page of the key operator mode menu is displayed.
3
In the key operator mode menu press the [13]
key.
The screen for configuring the settings appears.
4
Use the arrow keys on the lower edge of the touch screen to select the
screen page that contains the setting you want to modify.
5
Use the arrow keys on the right side of the touch screen to select the
setting you want to modify.
6
Press the [Change Settting Contents] key as many times as necessary
until you find the desired value.
7
Confirm your input by pressing [Return].
The key operator mode menu is displayed again.
7-50
Settings in Key Operator Mode
Memory switch setting
Di5510/Di7210