Table of Contents
Advertisement
7
(2) Setting user density 2
Specify the density setting for user 2.
Two user-defined density settings (user 1, user 2) can be selected in the
touch screen basic options screen Density.
1
Load an original.
2
Call up key operator mode.
The key operator mode menu is displayed.
3
In the key operator mode menu press the [3]
A submenu appears.
4
Press [2]
The screen for setting the copy density appears.
5
Set the desired density level.
H
Select among the settings [Darker] or [Lighter].
H
Select a density range
to print a sample output.
H
Press the [Start] key on the control panel to start printing the
sample output with the selected density settings.
H
Check the sample output.
H
Specify the desired value for the density setting using the touch
screen keypad.
6
Press the [OK] key to confirm your input.
The submenu appears again.
7-16
Setting user density level 2
(No.1
Settings in Key Operator Mode
User setting menu
in the submenu.
1~4,
No. 2
5~8, . . . or
key.
Set density
1)
Di5510/Di7210
Advertisement
Table of Contents
