3
Enabling Energy Saving Mode
Enable the energy saving mode automatically or manually.
DANGER
Risk of electrical shock by incorrect handling
The system remains under high voltage even when in energy saving
mode.
§
Observe all of the safety measures regarding the handling of high-
voltage components listed in this manual.
Automatic Enabling
Set up automatic enabling in key operator mode.
Specify in key operator mode how many minutes should pass after the last
system activity before the energy saving mode is enabled. For more
information, see page 7-49.
Default setting: 15 minutes
Manual activation
It is activated manually by pressing the [Energy Saver] key on the control
panel.
1
Press the [Energy Saver] key on the control panel.
A dialog field appears.
2
Press the [Yes] key to enable the
energy saving mode.
The [Energy Saver] LED key on the
control panel lights up. The touch
screen display dims. A message is
displayed on the touch screen.
§
Exiting Energy Saving Mode
Press any key on the control panel to end this mode.
3-44
Initial Steps . . .
Execute energy saving mode
YES/NO ?
Energy Saving Mode
Press key/screen to cancel
Di5510/Di7210