Table of Contents
Advertisement
4
Z-Fold
(with Hole-Punch/Z-fold unit ZK-3)
Have your copies finished with a Z-fold.
If you combine the Z-fold function with one of the finishing functions for the
main tray, the copy is created on A3/B4 copy paper and output to the main
tray.
If you combine Mixed Original and Z-folding, do not process A3 and B4
sizes at the same time. Otherwise, the Z-fold may not be carried out
cleanly.
Special paper cannot be Z-folded. Attempting to do so may lead to a
system malfunction.
Note the following important information!
• Paper sizes:
• Original weight:
• Fold width:
These features cannot be combined:
• Basic functions:
• Applications:
4-26
Z-Fold
A3, B4, 11"×17", 8.5"×14"
all other sizes are finished without Z-fold or with double fold
Plain/Recycled Paper (60 to 80 g/m²)
209 mm or less with A3
181 mm or less with B4
215 mm or less with 11"×17"
261.6 mm or less with 8.5"×14"
(measured from edge of paper to first fold line)
Loading document onto the original glass (only with Document
Memory), Stapling for B4, Output to sub tray, Folding, Stapling
& Folding, Tandem Mode,
OHP Interleave
Basic Functions
Z-Fold + Staple +
APS with Mixed Original
Di5510/Di7210
Advertisement
Table of Contents
