Table of Contents
Advertisement
7
Setting
39
Overlay delete
40
Orig. direction/binding mode
41
Continue image store (SRV)
42
Continue image recall (SRV)
43
Document direction
44
IP Scan Address manual input
45
I/P SCAN e-mail function mask
46
I/P SCAN HDD function mask
47
I/P SCAN FTP function mask
48
State of Platen/EDH (Reset)
49
Priority tray (blank overlap)
50
Auto Select the binding mode
* Initial setting
7-54
Settings in Key Operator Mode
Function
Sets whether data in overlay memory can be
deleted or overwritten.
Every job disabled* / Not every job disabled
Sets whether settings of special original settings or
user-defined settings should be reset on
completion of a copy job.
OFF* / ON
Sets whether the server mode memory function
should remain enabled after a memory cycle.
OFF* / ON
Sets whether the server mode recall function
should remain enabled after a recall cycle.
Face down* / Face up
Sets whether non-sorted or sorted 1-sided copies
should be output to the main tray.
Face down* / Face up
Sets whether a target address can be entered
manually.
Permitted* / Not permitted
Sets whether the scan to e-mail function can be
used.
Show* / Hide
Sets whether the Scan to HDD function can be
used.
Show* / Hide
Sets whether the Scan to FTP function can be
used.
Show* / Hide
Sets whether all functions are reset when the
touch screen is reset or whether the settings for
the Copy Mode should be retained.
Not keep* / Keep
Sets the paper feed cassette from which the paper
for unprinted
Printer tray* / PI tray
Sets whether the binding type in "Output Mode"
should be automatically matched if the binding
type is changed in "Special Originals".
OFF* / ON
Di5510/Di7210
Advertisement
Table of Contents
