Table of Contents
Advertisement
2
4
Fan the new paper.
Align the paper edges straight.
5
Load the new paper so that the side
that undulates upward is face up.
H
Tray 3
up to 500 sheets (80 g/m²)
H
Tray 4
up to 500 sheets (80 g/m²)
6
Make sure not to exceed the
maximum paper filling level. The
paper stack must not be higher than
the red mark of the indicator.
7
Press and hold the release latch on
the rear side paper guide. Move the
side edge guides so that they are
flush with the paper. When the
paper guides are correctly
positioned, you can let go of the
release lever.
8
Lower the paper feed roller back in
place.
9
Carefully slide the paper tray back.
If you have changed the paper size, the new size will be shown on the
main screen.
2-46
Getting to Know Your System
Di5510/Di7210
Advertisement
Table of Contents
