Table of Contents
Advertisement
6
H
Click [Output] to start printing the data on the system. Select the
finishing mode that you want.
Auto output
Enter the number of sets you want and then click [Apply]. The print
job is printed. The print job cannot be stopped or interrupted using
the Web Utilities. This can only be achieved on the system directly.
When the print job is finished, a message indicating so is displayed
on the PC.
Proof output
Enter the number of sets you want and then click [Apply]. One
complete set is to be printed. The touch screen displays the proof
mode window. Check the settings. Start output on the system
using the [Start] button on the control panel. When the print job is
finished, a message indicating so is displayed on the PC.
Wait output
Enter the number of sets you want and then click [Apply]. The data
are called up from the hard drive but not output. Select your
desired settings on the system. Change the number of sets if
necessary. Start output on the system using the [Start] button on
the control panel. When the print job is finished, a message
indicating so is displayed on the PC.
6-22
Network functions
Di5510/Di7210
Advertisement
Table of Contents
