Basic Functions
Procedure
Select your options based on the overview and the table on the following
page.
1
Press the [Output Menu] key.
Change the settings for the finishing mode.
Confirm your settings by pressing [OK].
2
Check the settings for the [Sort] key.
3
Configure the system settings for your job.
4
Use the 10-Key Pad to set the number of copies.
5
Load the originals
H
into the EDH or
H
on the original glass.
6
Press the [Start] key on the control panel to start the copy job.
Di5510/Di7210
4
4-35