Table of Contents
Advertisement
5
Stamp
Set Numbering
?
What options are there?
§
Select the type of stamp (page numbering, set numbering, date/
time).
§
Select the position of the imprint on the paper.
§
Press the [Fine Adj. Of Position] key to define the position of the
imprint.
§
Press the [Character Size] key to select a font size for the imprint.
§
Press the [Character Size/Type] key to select a font for the imprint.
§
Press the [Printed Page] key to specify which pages are to receive
the imprint.
§
Press the [Starting No.] key to specify the page on which the
imprint should begin. When the "Chapter" function is enabled, a
chapter number can also be set. For more information, see
page 5-52.
5
Confirm your settings by pressing [OK].
6
Change any other necessary system settings.
7
Use the 10-Key Pad to set the number of copies.
8
Load the originals
9
Press the [Start] key on the control panel to start the copy job.
5-54
Page Numbering
Date/Time
Applications
Di5510/Di7210
Advertisement
Table of Contents
