Network functions
6.4
Setting the E.K.C. function (Environment Setup)
Make the following user's choice settings for the E.K.C. function. Use the
web browser on a PC for this.
G
E.K.C. Data Add
Add new E.K.C. data to the E.K.C list (password, name and copy limit).
G
E.K.C. Data List
Change or delete the E.K.C. data (password, name or copy limit) in the
list, or reset the counter.
G
E.K.C. Function Setting
Show the following E.K.C. function settings.
H
Enabling and disabling the E.K.C. function
(EKC ON/OFF)
H
Selecting the response when the copy limit has been reached:
Warning
Immediately / After job / Warning
H
E.K.C. password acceptance: 8 characters / fewer than 8 characters
H
E.K.C. password input timing:
Auto reset timer/ Complete job
H
Wrong E.K.C. password (from printer):
Accept / Reject
Tip
The above settings can also be made directly at the device, except for
the setting for Wrong E.K.C. password (from printer).
Di5510/Di7210
6
6-29