Table of Contents
Advertisement
Getting to Know Your System
2.13
Monitoring the PM Count Time
Maintenance should be carried out after a certain number of copies have
been processed. You can read the time for the next maintenance call on
the PM counter.
When a maintenance interval is reached, a message will be shown
automatically on the lower left of the touch screen. When it does, contact
your technical representative to set up a maintenance visit.
Viewing the PM Count
View the time of the next maintenance interval.
1
Press the [Utility] key on the control
panel.
The counter list is displayed.
2
Press the [Mode Check] key on the
control panel.
The PM count is displayed on the
counter list.
Di5510/Di7210
Utility
Mode Check
2-63
2
Advertisement
Table of Contents
