Table of Contents
Advertisement
Settings in Key Operator Mode
7.11
(10) Control Panel Adjustment
Recalibrate the touch screen.
1
Call up key operator mode.
The key operator mode menu is displayed.
2
In the key operator mode menu press the [10]
adjustment
The screen for calibrating the monitor appears.
3
Take a pencil. Lightly touch the tip of the pencil to the + symbol
displayed in the upper right corner of the touch screen. Then do the
same with the + symbol in the lower left corner.
4
Check that the X and Y coordinates of the touch screen displayed in
the upper message line are within the range of the standard values,
which are displayed in the lower message line.
5
Press the white box labeled "Check Button" first in the upper left corner
and then the one in the lower right corner of the touch screen. Each
time you should hear a key click sound.
6
Only if necessary
If the X and Y coordinates do not lie within the range of the standard
values or you do not hear any key sounds when you press the control
panel boxes, repeat steps 3 to 5.
7
On the control panel press the [1] key to return to the selection.
The key operator mode menu is displayed again.
Di5510/Di7210
key.
Control panel
7-47
7
Advertisement
Table of Contents
