Initial Steps . . .
Interrupting the Setup of a Reserve Job
. . . in the event of a paper jam
If a paper jam occurs, the message
Interrupt the reserve job setup to remove the paper jam.
1
Press the job folder that displays the
The paper jam display appears.
2
Clear the paper jam.
3
Press the [Start] key on the control panel.
The job is continued.
4
Press the key for the job folder that you were setting up before you had
to interrupt it.
5
Continue setting up the reserve job.
Di5510/Di7210
Jam
is displayed on the job folder.
JAM
message.
3
3-29