Table of Contents
Advertisement
Settings in Key Operator Mode
5
Set the desired density level.
H
Select among the settings [Darker] or [Lighter].
H
Select a density range
to print a sample output.
H
Press the [Start] key on the control panel to start printing the
sample output with the selected density settings.
H
Check the sample output.
H
Specify the desired value for the density setting using the touch
screen keypad.
6
Press the [OK] key to confirm your input.
The submenu appears again.
7
Press the [Return] key.
The key operator mode menu is displayed again.
Di5510/Di7210
(No.1
1~4,
No. 2
5~8, . . . or
7
Set density
1)
7-15
Advertisement
Table of Contents
