Loading Mixed-Sized Originals Into The Edh - Konica Minolta Di5510 Advanced Information

.
Hide thumbs Also See for Di5510:
Table of Contents

Advertisement

3

Loading Mixed-Sized Originals into the EDH

Load up to 100 originals (80 g/m²) of the different sizes into the EDH.
Select one of the following copy modes:
G
"AMS" (Copy onto the same paper size) or
G
"APS" (Copy the originals onto corresponding paper sizes)
Note the following important information!
• Original sizes:
• Original types:
• Capacity
of the EDH:
1
Enable "Mixed Original".
For more information, see page 4-81.
2
only if required
Enable "AMS".
For more information see page 4-55.
or
Enable "APS".
For more information, see page 4-60.
3
Insert the originals face-up into the
EDH as follows:
H
A3, B4 A4R, A4, B5, A5
(A3 lengthwise/ A4 crosswise)
H
B4, A4R, B5R, B5, A5
(B4 lengthwise/ B5 crosswise)
H
A4R, B5R, A5
(A4 lengthwise/ A5 crosswise)
4
Make sure not to exceed the maximum paper filling level. The paper
stack must not be higher than the red mark of the indicator.
5
Align the originals to the back side of the EDH.
3-12
A3, B4, A4R, A4, B5, A5 (mixed)
B4, A4R, B5R, B5, A5 (mixed)
A4R, B5R, A5 (mixed)
standard papers (50 to 130 g/m²)
max. 100 originals (80 g/m²)
Initial Steps . . .
Di5510/Di7210

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di7210

Table of Contents