Table of Contents
Advertisement
Initial Steps . . .
3.9
Saving and Recalling System Settings
Store the system settings for up to 30 different jobs. Recall the system
settings as required.
Please note the following:
G
In key operator mode program memory slots where system settings
are stored can be locked. For more information, see page 7-29.
G
Locked program memory positions cannot be deleted or overwritten.
G
When a program memory position is locked, a padlock is displayed in
front of its program space number.
G
A locked program can be unlocked only in key operator mode.
G
Program memory slots with 16 asterisks indicate that system settings
were saved without a name.
Di5510/Di7210
3
3-35
Advertisement
Table of Contents
