Table of Contents
Advertisement
Basic Functions
Procedure
1
In the basic options press the [Output Menu] key.
The output menu is displayed. Only the [Group] and [Sort] keys are
enabled. All other keys are disabled.
2
Select the output mode for the offset tray.
H
Group
The copies are grouped and output offset by 30 mm.
H
Sort
The copies are sorted and output offset by 30 mm.
3
Confirm your selection by pressing [OK].
The basic options are displayed again.
4
Configure the system settings for your job.
5
Use the 10-Key Pad to set the number of copies.
6
Load the originals
H
into the EDH or
H
on the original glass.
7
Press the [Start] key on the control panel to start the copy job.
§
To output non-sorted copies, just disable the sorting function. The
[Sort] key is displayed with a white background.
Di5510/Di7210
4
4-15
Advertisement
Table of Contents
