5
3
Press the [Overlay Memory] key.
The overlay memory feature appears.
4
Select the desired image.
5
Press [OK] until the basic options appear again.
6
Use the 10-Key Pad to set the number of copies.
7
Insert the original that is to be overlaid with the desired image.
H
into the EDH
H
on the original glass.
8
Press the [Start] key to start the scanning cycle.
9
Press [Store] to leave scanning mode. Press the [Start] key on the
control panel to start the printout of the copies.
5-62
Applications
Di5510/Di7210