Table of Contents
Advertisement
3
3.6
Reserving Copy Jobs
You can use the Reserve Job feature to prepare up to ten jobs while
waiting for another job to finish scanning or printing. As soon as the
current job is completed, the first reserve job is started automatically.
Note the following important information!
These features cannot be combined:
• Basic functions:
• Applications:
Setting up Reserve Jobs
Reserve up to ten jobs while the system is busy processing another job.
The reserve jobs then start automatically one after the other. This allows
you to take full advantage of the system's capacities.
1
Load the originals of the first job into the EDH.
2
Press the [Start] key to start the scanning cycle.
The originals are fed in one after the other. Printing begins
immediately after the scanning cycle is done. The job folder for the
next job (reserve job) is cleared.
3
Press the key for the next free job folder.
The basic option settings now apply for the reserve job.
4
Make any necessary changes to the settings for the reserve job.
5
Be sure the scanning cycle for the originals of the previously started
job is finished.
3-20
Interruption, Proof Copy, Document Memory
Program Job, Overlay Memory
Initial Steps . . .
Di5510/Di7210
Advertisement
Table of Contents
