Copying Tabbed Originals: Tab Paper Size - Konica Minolta bizhub PRESS 1250 User Manual

6.1 Original Setting
5
Press [OK].
The Custom Size Screen will be restored.
The specified custom size will be displayed on the right side of the [Input Size] key.
6.1.7

Copying Tabbed Originals: Tab Paper Size

Use the Tab Paper Size mode to scan the standard sizes of tabbed original in order to make a copy including
the tab part image.
Also, using this mode with the Auto Image Shift (Tab Print) function enabled, the standard size original having
tab part image on the right edge can be printed properly onto tabbed paper by being shifted 0.49 inches to
the right side.
d
Reference
See page 5-27 for details on loading tabbed paper in a tray.
When loading a tray with tabbed paper, make the size setting of the tray in [Tray Setting] from the Machine
Screen or in [Paper Presetting] from the Copy Screen in order to specify a tab paper size to be used. See
page 6-39 for details.
The setting to specify whether or not to use the Needless Tab Paper Exit function is provided in [Function
Setting] on the Utility menu. For details, see Section 7 of the POD Administrator's Reference.
Using tabbed paper loaded in a tray for copying, Needless Tab Paper Exit function will be activated. See
page 5-29 for details.
0
Tab paper size and tab extension width can be specified as desired, while available tabbed original siz-
es are standard sizes only. The tab extension width of tabbed original should be 0.49 inches or less.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Original Setting].
The Original Setting Screen will be displayed.
4
Press [Tab Paper Size] provided under [Original Size].
The Tab Paper Size Screen will be displayed.
bizhub PRESS 1250/1052
6
6-15