Table of Contents
Advertisement
5
4
Set the selected function as desired.
Watermark
?
What options are there?
§
Select the type of imprint you want.
§
Select the density of the imprint.
§
Press the [Fine Adj. Of Position] key to define the position of the
imprint.
§
Press the [Character Size] key to select a font size for the imprint.
§
Press the [Starting No.] key to specify the page on which the
imprint should begin. For more information, see page 5-52.
5
Confirm your settings by pressing [OK].
6
Change any other necessary system settings.
7
Use the 10-Key Pad to set the number of copies.
8
Load the originals.
9
Press the [Start] key on the control panel to start the copy job.
5-56
Watermark Numbering
Applications
Di5510/Di7210
Advertisement
Table of Contents
