5
Procedure: Using Non-Image Area Erase
1
In the basic options press the [Application] key.
The screen with the
2
Press the [Non-Image Area Erase] key.
3
Change any other application settings.
4
Confirm your selection by pressing [OK].
5
Change any other necessary system settings.
6
Use the 10-Key Pad to set the number of copies.
7
Place the original on the original glass. Leave the original cover open.
8
Press the [Start] key on the control panel to start the copy job.
5-32
Applications
is displayed.
Applications
Di5510/Di7210