Table of Contents
Advertisement
Getting to Know Your System
CAUTION
External influences can cause damage to the system!
External influences can cause damage to the system. Observe the
following safety precautions to prevent system damage.
§
Do not subject the system to vibrations.
§
Never bring any magnetized object near the system.
§
Never place any objects heavier than 6.8 kg and/or thicker than 30 mm
onto the system.
§
Do not put any objects under the main tray of the finisher. During the
output cycle, the finisher moves downward and can be damaged by
objects in its way.
CAUTION
Incorrect handling can cause damage to the system!
Incorrect handling can cause damage to the system. Observe the
following safety precautions to prevent system damage.
§
Do not open any doors on the system during printing.
§
Do not switch the system off during printing.
§
Do not use stapled, conductive or heat-sensitive paper or paper
designed for inkjet printers, such as photopapers. Do not use color
OHP transparencies.
§
Do not exceed the capacity of the finisher trays. A finisher tray can
take a maximum of 150 sheets. If necessary, remove the output copies
several times when copying large amounts to reduce the load on the
finisher trays.
CAUTION
A negligible amount of ozone is released during printing!
While this is not a health hazard, it may result in an unpleasant odor. It is
recommended that the room be well ventilated.
§
Locate the system in a well-ventilated room.
Di5510/Di7210
2
2-21
Advertisement
Table of Contents
