Applications
Procedure: Using Auto Layout
1
In the basic options press the [Application] key.
The screen with the
2
Press the [Auto Layout] key to enable the application.
3
Change any other application settings. Confirm your settings by
pressing [OK].
The basic options are displayed again.
4
Change any other necessary system settings.
5
Use the 10-Key Pad to set the number of copies.
6
Load the originals
H
into the EDH
H
on the original glass.
?
Placing the originals on the original glass?
§
Do not close the EDH during the scanning cycle.
7
Press the [Start] key on the control panel to start the scanning cycle.
The copies are printed automatically after the scanning cycle.
Di5510/Di7210
Applications
is displayed.
5
5-43