Table of Contents
Advertisement
4
Hole-Punch
(only with Finisher FN-121 or FN-10 and Punch Kit PK-2/PK-5/PK-5
Swedish hole pattern or with Finisher FN-115 and Hole-Punch/Z-fold unit
ZK-3)
Output your copies with punched holes.
If you use the automatic paper tray switching feature, the holes may be on
the wrong side when a tray is changed. If this occurs, disable paper tray
switching.
80 mm
2 punched holes
Punch/Z-fold Unit takes priority!
If your system is equipped with both the Hole Punch Unit PK-2/PK-5
Swedish Hole-Punch and the Punch/Z-fold Unit ZK-3, the punch
function of the ZK-3 is applied.
4-22
80 mm
4 punched holes
Basic Functions
21 mm 70 mm
Swedish
punched holes
Di5510/Di7210
Advertisement
Table of Contents
