Initialize Mode - Omron SYSDRIVE 3G3FV User Manual

Preparing for Operation
3-4

Initialize Mode

The initialize mode is used to select the language displayed by the Unit, the access level,
and the control mode; it is also used to initialize the Unit's parameters.
S Selecting the Display Language
Use parameter A1-00 to select the language displayed by the Unit. Messages can be displayed in 0:
English, 1: Japanese, 2: German, 3: French, 4: Italian, 5: Spanish, or 6: Portuguese. This parameter is
not initialized by the initialize operation and it can be changed during operation.
Note The language that is set will be indicated on the display.
Parameter Display name p y
number
A1-00 Select Language
Example
The following example shows how to change parameter A1-00 so that Japanese is displayed instead of
English.
Key sequence
S Setting the Access Level
Use parameter A1-01 to select the parameter access level. This level determines which parameters
can be displayed and changed. (The parameters which can be displayed and changed also depend
upon the control mode being used.) This parameter can be changed during operation.
Parameter Display name p y
number
A1-01 Access Level
3-18
Setting g Units Default
range setting
0 to 6 --- 0
Display
Displays operation mode.
Displays initialize mode.
Puts the Unit in initialize mode.
(Select Language display)
Displays the parameter setting for A1-00.
Sets the display language to Japanese.
Writes the new setting.
Returns to the Select Language display.
Setting g Units Default
range setting
0 to 4 --- 2
Valid access levels
V/f V/f with Open Loop
Control PG
Quick-start, Basic, or Advanced
Explanation
Valid access levels
V/f V/f with Open Loop
Control PG
Quick-start, Basic, or Advanced
Chapter 3
Flux
Vector Vector
Flux
Vector Vector