Omron SYSDRIVE 3G3FV User Manual page 320

Parameter Lists
H Other Options Setup: F2 to F9
Name
Para
meter meter
Display
No.
name
F2-01 Sets the functions for channels
Analog
Reference 1 to 3 which are effective when
the 3G3IV-PAI14B Analog
Card
selection Reference Card is used.
0: 3-channel individual
(Channel 1: terminal 13,
Channel 2: terminal 14,
Channel 3: terminal 16)
1: 3 channel addition (Addition 1: 3-channel addition (Addition
values are the frequency
AI-14 Input
reference)
Sel
Note: When set to 0, select 1 for
F3-01 Digital Sets the Digital Reference Card
input method.
Reference
Card input 0: BCD 1% unit
1: BCD 0.1% unit
selection
2: BCD 0.01% unit
3: BCD 1 Hz unit
4: BCD 0.1 Hz unit
5: BCD 0.01 Hz unit
6: BCD special setting (5-digit
input)
7: Binary input
Note: Setting "6" is effective
DI Input
Note: When F3-01 is set to "7",
3G3IV-PD108: FF hex (255
decimal)
3G3FV-PD116H2: FFF hex
(4,095 decimal) for 12 bits or
7530 hex (30,000 decimal) for
16 bits
7-32
Description Setting
0, 1
l h f
b1-01. In this case the
multi-function input "Op-
tion/Inverter selection"
cannot be used.
0 to 7
only when the 3G3FV-
PDI16H2 is used, but the
input will be BCD and the
units will be set in o1-03 if units will be set in o1-03 if
01-03 has been set to "2"
or higher.
input the following values
as the max. frequency.
Default Chan-
range range setting setting ges ges
during
opera-
tion
0 NO
0 NO
Chapter 7
Control mode
V/f V/f Open
control with loop
PG vector
B B B
B B B
Page
Flux
vector
B 6-72
B 6-72